Home Bar Counter

Author: admin | Categories: Home Bars comments
Bar Counter Kiaat Veneer And Stone Tops

How to build a home bar counter. There is a basic and simple way to build a multipurpose bar for your home. You can add a bar to an existing wall or building a wall to add a bar. The bars provide more space for dining and take up less space than a table. Build your rod by first determining its depth. An excellent measure is 18 inches (45.7 cm) from the front to the rear. If you are using normal-sized chairs, make the part superior of the bar is 30 inches (76.2 cm) above the floor. If you are using banks to bar, sets the bar at 42 inches (1.06 cm) above the floor.

Home bar counter, veneer acquires 3/4 inch (1.9 cm) to construct the rod. Cut the wood to a depth of 18 inches (45.7 cm), and then cut the end desired length. Cut strips of 1½ inches (3.8 cm) wood your 3/8 inch (1.9 cm). Glue and nail strips around the outer ends of the piece of wood 18 inches (45.7 cm). This will make your bar is 1 ½ inches thick. Bar laminate to cover your purchase. Use contact adhesive to ensure your laminate on the part superior of your bar. Cut the rolled to a length of 1-1 1/2 inches (2.54 to 3.8 cm) larger than the portion above your bar.

READ :  Ideas Small Bar Cabinets for Home

Comments are closed.