Indoor window shutters – Most horizontal blinds fit in a window frame and the rest of the actual window. Many horizontal blinds also rest against the glass of the window and mounted inside the window frame. For blind to fit within the window frame, however, it must be the proper length. If you have a window blind that is too long, you can adjust the setting under blindly cutting to length.
Indoor window shutters pull the chain in the blind and lock the blind into the closed position. This means that the slats are pressed against the top rail and bottom rail presses against the slats. Set a C-clamp at each end of the blind to keep everything securely closed. Clamps pressed against the top of the top rail and the bottom of the bottom rail.
Measure the width of the opening in the indoor window shutters frame with a tape and then transfer the measurement window blind by placing marks on the face of the top rail and bottom rail. Make sure you have the same amount at each end of the blinds to eliminate. This means that the measurement should focus on the blind. Cut although the blind headrail, slats and bottom rail with a fine-toothed saw coping.
12 Design Indoor Window Shutters Photos